Description
Nanolex Ultra Cut Polish
Nanolex Ultra Cut Polish is a heavy-cut abrasive polish developed for tackling severe paint defects, deep scratches, heavy swirls and other stubborn imperfections. Powered by calcined aluminium oxide abrasives, it delivers aggressive correction of defects up to 1000-grit sanding marks while leaving a remarkably smooth surface for the next polishing stage. Ideal for professional detailers handling heavily marked or neglected paintwork, it provides the cutting power needed for demanding correction jobs without unnecessarily extending the polishing process.
Key Features
- Extreme Cutting Power: Designed to tackle severe paint defects and heavily marked surfaces.
- Removes Deep Defects: Helps correct deep scratches, heavy swirls and significant paint imperfections.
- Up to 1000-Grit Correction: Suitable for correcting defects associated with sanding marks up to 1000 grit.
- Calcined Aluminium Oxide Abrasives: Advanced abrasive technology provides strong and effective paint correction.
- Fast Defect Correction: Helps detailers achieve significant correction efficiently.
- Smooth Finish After Heavy Cutting: Despite its aggressive cutting performance, it leaves a relatively smooth surface ready for subsequent polishing.
- Professional Detailing Solution: Particularly suited to heavily used, neglected or severely defective vehicles.
- Ideal First-Step Polish: Excellent for the initial stage of a multi-step paint correction process.
How to Use
- Thoroughly wash and decontaminate the vehicle before polishing.
- Inspect the paintwork and identify the areas requiring heavy correction.
- Perform a small test spot to determine the most suitable pad and polishing combination.
- Apply a small amount of Nanolex Ultra Cut Polish to an appropriate cutting pad.
- Work the product systematically over a small section using your polishing machine and the recommended technique.
- Wipe away the polishing residue with a clean, soft microfiber towel.
- Inspect the corrected area under suitable lighting.
- Follow with a finer polishing step if additional refinement and gloss are required.
Safety Tips
- Wear suitable protective gloves and eye protection during polishing.
- Ensure adequate ventilation, particularly when machine polishing for extended periods.
- Always perform a test spot before treating the complete vehicle.
- Avoid excessive pressure or prolonged polishing in one area, which can generate unnecessary heat.
- Monitor the panel temperature during machine polishing.
- Avoid contact with eyes and skin.
- Do not use on surfaces for which the product is not intended.
- Follow the manufacturer's application and safety instructions.
