Description
Nanolex Ultra Cut Polish
Nanolex Ultra Cut Polish is a high-performance abrasive polish designed to correct severe paint defects, deep scratches and heavy swirl marks. Formulated with calcined aluminium oxide abrasives, it delivers powerful cutting performance and helps correct sanding marks up to 1000 grit. Ideal for professional detailers working on heavily damaged or neglected paintwork, it leaves a smooth surface ready for subsequent polishing stages, helping you work towards a refined, high-gloss finish.
Key Features
- Powerful Cutting Performance: Designed to tackle severe scratches, heavy swirl marks and significant paint imperfections.
- Advanced Abrasive Technology: Uses calcined aluminium oxide abrasives for effective paint correction.
- Correction up to 1000 Grit: Helps remove sanding marks up to 1000 grit, depending on the paint system and polishing setup.
- Efficient Defect Removal: Supports faster correction of heavily marked and neglected paintwork.
- Smooth Surface Finish: Leaves the paintwork ready for further refinement with a finer polishing compound.
- Ideal for Multi-Stage Polishing: Works as a heavy-cut step before finishing polish when additional gloss and clarity are required.
- Professional Detailing Solution: Suitable for experienced detailers handling demanding paint correction jobs.
How to Use
- Wash and decontaminate the vehicle thoroughly before polishing.
- Inspect the paintwork under suitable lighting to identify scratches, swirl marks and other defects.
- Perform a test spot to determine the appropriate polishing pad and machine combination.
- Apply a small amount of Nanolex Ultra Cut Polish to a suitable cutting pad.
- Work on a small section at a time, following the manufacturer's recommended machine speed and polishing technique.
- Wipe away the residue using a clean, soft microfiber towel.
- Inspect the surface under suitable lighting to evaluate the correction achieved.
- Follow with a finer polish if necessary to refine the finish and enhance paint clarity.
Safety Tips
- Wear suitable protective gloves and eye protection when handling the product.
- Work in a well-ventilated area.
- Avoid prolonged polishing in one spot to prevent excessive heat build-up.
- Monitor panel temperature during machine polishing.
- Test the product on an inconspicuous area before full application.
- Keep the product away from eyes and out of reach of children.
- Follow the manufacturer's application instructions and safety data sheet.
